After cleaning all kinds of dirt, oil, blistered paint and dust from the application surfaces, surface defects should be corrected with SAN DECO ACRYLIC PUTTY INTERIOR and painted surfaces should be primed with SAN DECO DECOPRIMER.

• Once the undercoat is applied, with a wooden brush, apply SANDECO ART / SANDECO ART VELVET, without dilution. While it is still wet, apply a single layer with the wooden brush, by forming the desired patterns with circular or linear movements,
• SANDECO ART VELVET is applied same method like SANDECO ART. The only addition
  of application on to this is, shaving the final textures with plastic spatula before product dries.
• The temperature of the application environment must be kept between +5°C and +35°C during
  application and for 24 hours afterwards.

Allow 4-5 hours for touch dry and 24 hours for complete dry at 23°C environment conditions.

Depending on the surface smoothness, its porosity and the application methods, for a single coat application:
– 1 lt covers 6,5 – 8,5 m² of surface
– 1 kg covers 5,0 – 6,5 m2 of surface
– The paint consumption for 1 m2 area is 120-160 ml and 150-200 gr.

TDS

• DP.003.ENG_SANDECO_ARTART_VELVET_TDS_ENG-2021.pdf

SDS

• SANDECO-ART_DEKA_BOYA_SDS_326096_Ver.3.0EN.pdf

• SANDECO-ART-VELVET_DEKA_BOYA_SDS_330053_Ver.3.0EN.pdf