Effect Wind – Sandeco

}

FEATURES

– Creates difference on the surfaces of applications by its special grain texture and two dimensional pearls

– By emphasizing the grain structure in the product; different applications can be achieved

– Due its high vapor permeability, it allows surface to discharge the steam and breathe

– As it is water-based, it is harmless to human health and environment

– It provides a pleasant odour in the application environments with its perfumed feature

Buy

ADDITIONAL FEATURES

After removing all kinds of dirt, grease, bloated paint and dust from the application surface, the surface defects should be corrected with SAN DECO ACRYLIC PUTTY INTERIOR and undercoated with SAN DECO UNIPRIMER.

EFFECT WIND is a product, which is applied on the EFFECT WIND UNDERCOAT. Effect Wind Undercoat which chosen according to color chart, should be thinned with 5-10% clean water and be applied with 2 layer, using roller or brush. 4-5 hours should be allowed between each coat.
– EFFECT WIND is applied with a special application tool consisting of dual headed brushes after drying of Effect Wind Undercoat. Dual headed brushes dived into the Effect Wind packages, which are chosen two different colors. The application technique is based on applying the product in all directions on the wall without overlapping two colors with alternative brush touches. Before the product starts drying, the grain particles inside will be spread by wooden brush applying cross touches.
– The environment of application must be kept between +5°C to +35°C within 24 hours during and after the application.

Allow 4-5 hours for touch dry and 24 hours for complete dry at 23oC environment conditions.

Depending on the surface smoothness, its porosity and the application methods, for a single coat application:
– 1,2 (0,6 lt+0,6lt) lt covers 10,0–12 m² of surface
– 1 kg covers 7-8,5 m2 of surface
– The paint consumption for 1 m2 area is 100-120 ml and 110-140 gr.