SCOPE OF APPLICATION

In all kinds of buildings; Plaster is used on exposed concrete, brick, wood, briquette, eternit and on primed metal surfaces and exterior thermal insulation systems with a suitable primer.

Dentex Deco

FEATURES

ADDITIONAL FEATURES

Sandeco

Clean all kinds of dirt, oil, blistered Paint and dust off the application surface and level the surface defaults with SAN DECO ACRYLIC PUTTY EXTERIOR. Surfaces with old paint or surfaces to be painted must be undercoated with SAN DECO UNIPRIMER.

Sandeco

– Prior to application, dilute DENTEX DECO with 5-10 % of fresh water then mix it well until it is homogenous.

– Product can be applied with roller and then desired pattern can be obtained with specific roller type,

– It is recommended to apply without dilution if a thicker texture is preferred,

– If DENTEX product is applied on DENTEX DECO, after 24 hours of drying time, apply DENTEX paint by diluting it with 5-10% water with – roller in 2 coats,

– The temperature of the application environment must be kept between +5°C and +35°C during application and for 24 hours afterwards.

Sandeco

Allow 4-6 hours for touch dry and 24 hours for complete dry at 23˚C environment conditions.

Sandeco

Depending on surface smoothness, porosity and application methods, for a single coat application:

DENTEX DECO Fine Pattern:
– 1 lt covers 1,25 – 1,55 m² of surface,
– 1 kg covers 0,65– 0,85 m2 of surface,
– The paint consumption for 1 m2 area is 640 -800 ml and 1200 – 1500 gr.

DENTEX DECO Thick Pattern:
– 1 lt covers 0,9 – 1,25 m² of surface,
– 1 kg covers 0,50 – 0,70 m2 of surface,
– The paint consumption for 1 m2 area is 800 -1100 ml and 1420 – 2000 gr.