Sandeco - Acrylic Putty Exterior

Acrylic Putty Exterior

SCOPE OF APPLICATION

Used for filling the pores in the mineral based surfaces in exterior sides like concrete, light concrete, aerated concrete or plaster

}
Acrylic Putty Exterior

FEATURES

– High adherence and aspiration ability,

– Forms a very durable, smooth and non-chalking surface,

– Decrease in wastage/consumption of the paint,

– Not much chalking during sanding process,

– It smooths the surface with maximum 2 coats,.

– As it is water-based, it is harmless to human health and environment.

ADDITIONAL FEATURES

Sandeco

Clean all dirt, oil, blistered paint and dust off the application surface.

Sandeco

– ACRYLIC PUTTY EXTERIOR must be mixed thoroughly prior to application,

– ACRYLIC PUTTY EXTERIOR must be applied with steel trowel as one or two coats depending on the surface roughness,

– 24 hours after the putty application, defects on the surface and trowel marks must be smoothed with sandpaper,

– The environment of application must be kept between +5°C to +35°C within 24 hours during and after the application.

Sandeco

Allow 4-6 hours for touch dry and 24 hours for complete dry at 23˚C environment conditions.

Sandeco

Depending on surface smoothness, porosity and application methods, for a single coat application;

– 1 lt covers 2,25 – 4,5 m² of surface,
– 1 kg covers 1,25 – 2,5 m2 of surface,
– The paint consumption for 1 m2 area is 220 – 450 ml and 400 – 800 gr.