SCOPE OF APPLICATION
DECOPLAS is applied on properly prepared interior mineral surfaces like rough cast, concrete, cement sheet, plaster panel surfaces and surfaces which have been painted before.
– Easy cleaning.
– High covering ability.
– Highly vapour permeable, it enables the vapour to be thrown out and allows the surface to breathe.
– Water-based, odour-free; it is harmless for human health and environment.
After removing all kind of dirt, oil, blistered paint and dust from the application surfaces, the defects of the surface should be corrected with SAN DECO ACRYLIC PRIMER INTERIOR. The old painted or to-be-painted surfaces with SAN DECO UNIPRIMER.
Prior to application, dilute DECOPLAS with (maximum) 20% of fresh water and mix it properly.
– Apply 2 coats with a roller, brush or spraying method and wait minimum 4 hours before applying the second layer.
– The environment of application must be kept between +5°C to +35°C within 24 hours during and after the application.
Allow 4-5 hours for touch dry and 24 hours for complete dry at 23˚C environment conditions.
Depending on the surface smoothness, its porosity and the application methods, for a single coat application:
– 1 liter of paint covers an area of 12,5 – 16 m²
– 1 kg of paint covers an area of 8,0 – 9,5 m2
– The paint consumption for 1 m2 area is: 65 – 80 ml and 105-125 gr.