Sandeco - Beton Contact

Beton Contact

SCOPE OF APPLICATION

BETON CONTACT is used to increase the adherence of gypsum plaster and similar lime-gypsum mortars on exposed concrete.

}
Beton Contact

FEATURES

– Adheres very well to the surface.

– Penetrates exposed concrete very well to provide a good ground for other application materials,

– As it is water-based, it is harmless to human health and environment.

ADDITIONAL FEATURES

Sandeco

Clean all dirt, oil, blistered paint and dust off the application surface; level the surface defects, if any.

Sandeco

Prior to application dilute BETON CONTACT with 40-45% water, mix well.
– Then apply the product with roller,
– Start plaster or gypsum application 24 hours after applying BETON CONTACT.
– The environment of application must be kept between +5°C to +35°C within 24 hours during and after the application.

Sandeco

Allow 5-6 hours for touch dry and 24 hours for complete dry at 23˚C environment conditions.

Sandeco

Depending on surface smoothness, porosity and application methods, for a single coat application;
– 1 lt covers 5,5– 11,0 m² of surface,
– 1 kg covers 3,0– 6,5 m2 of surface,
– The paint consumption for 1 m2 area is 90 -180 ml and 150- 330 gr.