Decorative Paints
Decorative Paints
SCOPE OF APPLICATION
On all interior walls, plaster coating, gross concrete and wooden surfaces; it is used together with its appropriate primer after the surface preparation.
FEATURES
Patinalusso is a bright and decorative topcoat with silver and gold pearlescent finishes, easily applied on acrylic and lime-based surfaces in interior spaces. It can be polished effortlessly using a dry, clean cloth or a polishing machine.
It is applied on the surface of acrylic and lime-based decorative coatings used indoors.
It is water-based.
It is safe for human health and the environment.
After removing all kinds of dirt, grease, bloated paint and dust from the application surface, the surface defects should be corrected with SAN DECO ACRYLIC PUTTY INTERIOR and undercoated with SAN DECO DECOPRIMER.
– ATRACTO should be mixed homogenously, without dilution.
– At first coat, ATRACTO should be applied by steel trowel or brush.
– The second coat can be completed by using a trowel or brush again by giving desired effect.
– Minimum 6 hours should be allowed between each coat.
– The environment of application must be kept between +5°C to +35°C within 24 hours during and after the application.
Allow 2-3 hours for touch dry and 24 hours for complete dry at 23oC environment conditions.
Depending on the surface smoothness, its porosity and the application methods, for a single coat application:
ATRACTO:
– 1 lt covers 8,0 – 12,5 m² of surface – 1 kg covers 6,5 – 10,0 m2 of surface
– The paint consumption for 1 m2 area is 80-125 ml and 100-150 gr.
ATRACTO TOUCH:
– 1 lt covers 8,5 – 13 m² of surface – 1 kg covers 7 – 11 m2 of surface
– The paint consumption for 1 m2 area is 76-118 ml and 90-140 gr.
