After cleaning all kinds of dust, dirt, oil, swelled paint from the application area, surface irregularities should be eliminated by SAN DECO ACRYLIC PUTTY INTERIOR and should be plastered with SAN DECO DECOPRIMER.

Before application, OBIANTE should be softened by mixing with steel hoe without diluting.
– Then OBIANTE is applied on surface as a single coat according to the desired thickness with a steel hoe.
Various designs are formed with a special tool while the product is still wet.
– After 20 minutes at 23±2˚C, when product starts to settle, the surface is finished by furbishing it with a steel trowel. In order to ensure a better smoothness and brightness, the surface of the product is thoroughly smoothened with trowel after spraying water on OBIANTE product. Then let it drying.
– After complete dryness is reached with OBIANTE product, Pearlescent Decorative Finish is applied in one or more color as desired to complete the procedure.
– The temperature of the application environment must be kept between +5°C and +35°C during application and for 24 hours afterwards.

Allow 5-6 hours for touch dry and 24 hours for complete dry at 23˚C environment conditions.

Depending on surface smoothness, porosity and application methods, for a single coat application;
– 1 lt covers 1,05 – 1,40 m² of surface
– 1 kg covers 0,65 – 0,85 m2 of surface
– The paint consumption for 1 m2 area is 715–950 ml and 1200–1600 gr.

TDS

• DP.021.ENG_OBIANTE_TDS_ENG_Rev2_17112020-2021.pdf

SDS

• OBIANTE_DEKA_BOYA_SDS_330030_Ver.3.0EN.pdf